Headlines > News > ESA’s new X-ray optics for observing the hot Universe

ESA’s new X-ray optics for observing the hot Universe

Published by Klaus Schmidt on Fri May 16, 2014 1:52 pm via: ESA
Share
More share options
Tools
Tags

A new idea to use super-polished silicon wafers as the heart of a telescope is set to reveal more of the hot, high-energy Universe, peering back into its turbulent history.

Invisible X-rays tell us about the very hot matter in the Universe – black holes, supernovas and superheated gas clouds. Today’s X-ray observatories, ESA’s XMM-Newton and NASA’s Chandra, were launched in the last century, and are still delivering world-class science.  But they are starting to age.

Artist's impression of an active galaxy. Copyright ESA/AOES Medialab

Artist's impression of an active galaxy. Copyright ESA/AOES Medialab

To replace them, ESA is planning a much more capable X-ray observatory for launch in 2028, which would probe 10 to 100 times deeper into the Universe than the current generation of X-ray telescopes.

“This demands a whole new type of X-ray mirror,” explains Marcos Bavdaz, leading the technology push for ESA’s future science missions. “To reach the kind of size needed, this new mission’s mirrors will have to be 10 times lighter than XMM’s, while delivering even sharper images.”

The problem is that energetic X-rays do not behave like typical light waves – try to reflect them with a standard mirror and they are absorbed inside. Instead, X-rays can only be reflected at shallow angles, like stones skimming along water.

Stacked telescope mirrors of ESA's current XMM-Newton. Copyright ESA

Stacked telescope mirrors of ESA's current XMM-Newton. Copyright ESA

That means multiple mirrors must be stacked together to build a large-enough telescope. XMM has 174 gold-plated nickel mirrors, nested inside one another like Russian dolls.

But to reach the performance required for ESA’s next X-ray mission, tens of thousands of densely packed mirror plates will be needed. How can this be done?

A new approach is required. ‘Silicon pore optics’, developed by ESA, draws on high-tech equipment and materials from the semiconductor industry.

 Silicon pore optics mirror stack. Copyright cosine Research

Silicon pore optics mirror stack. Copyright cosine Research

“We make use of industrial silicon wafers, normally used to manufacture microprocessors,” adds Eric Wille, optical system engineer for the X-ray optics development.

“We take advantage of their stiffness and super-polished surface, stacking a few dozen at a time together to form a single ‘mirror module’.”

Many hundreds of these modules will be fitted together to form the optics of the X-ray mission.

Vibration testing. Copyright ESA

Vibration testing. Copyright ESA

Grooves are cut into the wafers, leaving stiffening ribs and paper-thin mirrors, which are then covered with reflective metal. For maximum accuracy, semiconductor manufacturing techniques are applied for the stacking process.

“Stacking is done by a specially designed robot, aiming for micron-scale precision,” Eric describes. “We’ve seen big jumps in quality as the robotics improve.”

“All the stacking takes place in a cleanroom, since tiny dust particles risk large deformations in the mirror stack.

XMM-Newton: hot stars in X-rays. Copyright ESA/XMM-Newton/EPIC/XMM-Newton-SOC/Boulanger

XMM-Newton: hot stars in X-rays. Copyright ESA/XMM-Newton/EPIC/XMM-Newton-SOC/Boulanger

“The semiconductor industry is improving the quality of silicon wafers, which will further improve the mirror quality in future.”

The company cosine Research, leading the silicon pore optics consortium, has succeeded in the routine production of complete mirror modules.

Hundreds of mirror plates are regularly made by Micronit Microfluidics, a company specialised in micromachining large quantities of glass and silicon products.

Another consortium member, Kayser-Threde, has vibration-tested a mirror module and its mounting system, showing the design is capable of enduring a launch to space.

ESA’s mission to the hot, high-energy universe

In November 2013 the science theme ‘the hot and energetic Universe’ was selected for the second Large-class mission, or L2, in ESA’s Cosmic Vision science programme – to be pursued with an advanced X-ray observatory.

With a launch date foreseen for 2028, the mission will address two key questions. How and why does ordinary matter assemble into the galaxies and galactic clusters that we see today, and how do black holes – lurking at the centre of almost all galaxies – grow and influence their surroundings?

Still many years from launch, the underlying optical technology required is being prepared as a joint effort between ESA’s Technology Research Programme – turning innovative ideas into working prototypes – and its Science Core Technology Programme – developing enabling technologies for future science missions.

No comments
Start the ball rolling by posting a comment on this article!
Leave a reply
You must be logged in to post a comment.
© 2014 The International Space Fellowship, developed by Gabitasoft Interactive. All Rights Reserved.  Privacy Policy | Terms of Use