Headlines > News > ATK Successfully Tests Attitude Control Motor for Orion Launch Abort System

ATK Successfully Tests Attitude Control Motor for Orion Launch Abort System

Published by Klaus Schmidt on Sat Mar 20, 2010 2:57 pm via: ATK
More share options

(ATK) – Key Milestone Test Performed at ATK’s Elkton, Maryland Facility

MINNEAPOLIS — Alliant Techsystems (NYSE: ATK) announced that it successfully completed the second of two ground tests of a full-scale attitude control motor (ACM) for the launch abort system (LAS) of NASA’s Orion crew exploration vehicle.  The second test was conducted on March 17, and evaluated environment extremes and ignition system robustness in addition to confirming the motor performance.  The test was conducted at ATK’s facility in Elkton, Maryland, where the first successful test was conducted on December 15, 2009.

Lockheed Martin, the prime contractor to NASA for Orion, leads the project team developing the nation’s next-generation space flight vehicle to carry out missions to destinations throughout our solar system.  Orion’s launch abort system is critical to the human rating of any similarly designed spacecraft and is essential for crew safety which is fundamental to successful human space exploration in the future.

This test of the control motor validates the readiness for NASA’s upcoming pad abort 1 (PA-1) flight test that will be conducted at White Sands Missile Range (WSMR), New Mexico.  The PA-1 ACM was delivered to WSMR in February.  PA-1 is the first LAS flight test for NASA’s Orion crew exploration vehicle.

“The success of this test, coupled with the success of the first test last December, demonstrates again that crew safety is an overriding priority in the design of the crew vehicles to be used in future human exploration missions.  We are now ready for the next major milestone, a flight demonstration,” said Bart Olson, interim President, ATK Mission Systems.

ATK’s attitude control motor provides steering for the Orion launch abort system, which is designed to safely lift and steer the Orion crew module away from the launch vehicle in the event of an emergency.  This was the seventh in a series of ground tests of Orion’s attitude control motor system, validating that the thruster system performs as designed.

ATK’s attitude control motor consists of a solid propellant gas generator, with eight proportional valves equally spaced around the circumference of the three-foot diameter motor.  In combination, the valves can exert up to 7,000 pounds of steering force to the vehicle in any direction upon command from the crew module.  The valves are controlled by a redundant power and control system.

ATK is under contract to Lockheed Martin to develop the attitude control motor and provide motors for Orion’s development test flights and human-rated flights.  ATK is also responsible for the main launch abort motor, successfully test-fired November 2008, and the Ares I first stage, which was successfully test-fired in September 2009.

No comments
Start the ball rolling by posting a comment on this article!
Leave a reply
You must be logged in to post a comment.
© 2018 The International Space Fellowship, developed by Gabitasoft Interactive. All Rights Reserved.  Privacy Policy | Terms of Use